After Sales Services

No.

Yes. The internal storage is 8GB. For DJI Mavic 3 Cine, 1TB SSD is provided.

Please go to the app and check it under “About” interface.

Yes.

Use the DJI 10Gbps Lightspeed Data Cable in the box to connect the aircraft to your computer via the USB-C port. Make sure the write speed of your storage device is greater than 700MB/s.
Other data cables are not recommended since they may take longer to transfer files as high-speed transmission may not be supported.

No.

The propeller structure adopts a new design, with the edges made of a softer material. This not only reduces noise during flight, but also causes less damage to people or objects in the event of an accident.

Replace the propellers in a timely manner to ensure safety, especially if any propeller is damaged or misshaped.

Yes, and upward and lateral obstacles avoidance are available in the normal mode.

Yes.

In a well-lit environment that vision sensors are available, DJI Mavic 3 can avoid obstacles during RTH.

In a well-lit environment that vision sensors are available, DJI Mavic 3 can avoid obstacles during Advanced RTH.

Yes, and the controllable range is ±5°.

No.

The DJI Mavic 3 gimbal supports Follow and FPV mode.

After connecting the aircraft to the DJI Fly app, go to “Settings” -> “Control”-> “Gimbal Calibration” and calibrate the gimbal.

Yes, and the tilt controllable range is -90° to 35°.

No, and official UV filter is not released.

Yes. Hold the gimbal and camera module, slowly remove the camera front panel, and then replace the ND filter.
Note that the ND filter has to be properly fitted to avoid a detachment during flight.

No.

Yes, but it is not available in Explore mode.

Auto focus and manual focus;
Hasselblad Camera Focus Range: 1 m to ∞
Tele Camera Focus Range: 3 m to ∞

8 bit (JPEG), 12 bit (DNG), 10 bit (D-Log mode for recording), and 8 bit (Normal color mode for recording).
It has a dynamic range of 12.8 stops.

Yes, but Explore mode is not available when the camera is in M mode.
The shutter speed, ISO, and white balance can be adjusted in M mode.

Electronic Shutter
Hasselblad camera: 1/8000~8
Tele camera: 1/8000~2

Enter the Video mode and select 4K and above resolution, enter Settings-Camera-Coding Format and select ProRes. Then a video can be recorded with Apple ProRes 422 HQ encoding.
Note: After ProRes is selected, the encoding format will be restored to H.264 when entering the Explore mode. After exiting the Explore mode, you can continue to record the video with Apple ProRes 422 HQ encoding. During recording, entering/exiting the Explore mode is not supported.

Final Cut Pro, Adobe Premier, DaVinci Resolve and other editing software that support ProRes format.

Enter the Explore mode by tapping the telescope icon next to the shutter/record button in the DJI Fly app. In Explore mode, perform the following methods to achieve hybrid zoom.
1. Tap the zoom button under the telescope icon to achieve 1x, 2x, 4x, 7x, 14x, and 28x.
2. Press and hold the zoom button shown in the app, and drag the slider up and down to adjust the zoom ratio.
3. Use two fingers to zoom in and out on the app screen.
4. When the remote controller (RC-N1) is used, press the Fn button and then toggle the gimbal dial to zoom in or out.
5. When DJI RC Pro is used, toggle the camera settings dial on the right.

Gimbal and Camera

DJI Mavic 3 features a built-in gimbal lock to prevent the 3-axis gimbal and camera from shaking, adding an additional layer of safety during transportation and storage.
Precautions for use:
1. The normal operating temperature of the gimbal lock is -10° to 40° C (32 to 104° F). If temperatures are outside of this range, it may fail to lock or unlock properly. You will be prompted by the DJI Fly app to use it within the temperature range. For emergency use in special situations, you can manually twist the three axes without damaging the gimbal itself, but this measure is not recommended.
2. The built-in gimbal lock may become unlocked due to external impact. In this case, power on the aircraft and then power off to lock again.
3. After the gimbal is locked, vibrations in each axis may occur.

Enter the Explore mode by tapping the telescope icon next to the shutter/record button in the DJI Fly app. In Explore mode, perform the following methods to achieve hybrid zoom.
1. Tap the zoom button under the telescope icon to achieve 1x, 2x, 4x, 7x, 14x, and 28x.
2. Press and hold the zoom button shown in the app, and drag the slider up and down to adjust the zoom ratio.
3. Use two fingers to zoom in and out on the app screen.
4. When the remote controller (RC-N1) is used, press the Fn button and then toggle the gimbal dial to zoom in or out.
5. When DJI RC Pro is used, toggle the camera settings dial on the right.

There is a SRT file generated separately.

The tele camera is available only when using Explore mode. Once Explore mode is enabled and the camera zoom exceeds 7x, Mavic 3 will switch to the tele camera automatically.

No.

No.

No.

Yes. If “Obstacle Avoidance Action” is set to “Off” under “Flight Assistance” in the DJI Fly app, the vision sensing systems (except for the downward vision sensing system) of the aircraft will be turned off.

Yes.

In Video mode, when the frame rate is set to 60fps or 120fps, the aircraft automatically enable 1080p/60fps image transmission.
In Photo mode, 1080p/60fps image transmission is used by default.

When using the DJI RC Pro or DJI RC-N1 Remote Controller, the maximum transmission range is 15 km.

No.

Insert the battery into the aircraft, power on the aircraft, connect the aircraft to the DJI Fly app or DJI Assistant 2. If the battery version is not matched with the aircraft version, a prompt indicating that the firmware needs to be updated will be displayed. Then follow on-screen instructions to update the battery.

No, and DJI Fly will indicate that the update has failed. In this case, please connect the Internet and download the firmware again for the update.

a. Make sure that the remaining battery level is 20% or more.
b. The firmware update failed if the aircraft or remote controller is powered off during the update process. In this case, please power on the aircraft and remote controller, and update again.
c. The internet was disconnected during the firmware download.
It is normal that the aircraft restarts multiple times during the update.

Yes. After the firmware is downloaded, you can disconnect the network and run the firmware update normally.

Yes. The DJI Mavic 3 firmware can be updated using DJI Assistant 2.

Yes. You can apply for permission to operate in restricted flight areas using the DJI Fly app. Just apply by tapping “Unlock GEO Zone” in the DJI Fly app, or fill in the required information at https://www.dji.com/en/flysafe/custom-unlock.

Yes.

Yes.

DJI Mavic 3 features SmartPhoto, which is integrated into the normal shooting function to offer higher image quality and greater flexibility.

The maximum horizontal speed is 15 m/s and maximum vertical (ascent/descent) speed is 6 m/s.

For Android users, the DJI Mavic 3 RC-N1 remote controller charges the mobile device once it is connected by default, which cannot be disabled in DJI Fly. The working time of the remote controller is about 100 minutes.
For iOS users, there is a charging phone option in the DJI Fly app for iOS v1.4.8, which can be enabled or disabled.

The port on the remote controller is Type-C port, and accessories are provided in the package, including RC Cable (USB Type-C Connector) x1, RC Cable (Lightning Connector) x1, and RC Cable (Micro-USB Connector) x1.

DJI Mavic 3 is used with DJI RC-N1 remote controller that does not have an HDMI output.
DJI Mavic 3 Cine is used with DJI RC Pro that supports HDMI output.

Yes, and please note that the sticks storage slot is at the bottom of the RC-N1 remote controller while the sticks storage slot is at the back of DJI RC Pro.

The remote controller uses omnidirectional antennas (One antenna is built-in on the top of the phone holder.). Please point the antennas at the aircraft during use.
Make sure to operate the aircraft in an open area. Tall metal structures, mountains, rocks, and forests may interfere with the aircraft’s compass and GPS signals.
In order to prevent the remote controller from interfering with other wireless devices, be sure to turn off other wireless devices before using the remote controller.
Do not fly in the vicinity of a source of electromagnetic interference. Sources of electromagnetic interference include but are not limited to: Wi-Fi hotspots, routers, Bluetooth devices, high-voltage wires, high-voltage power transmission stations, mobile phone base stations, and television broadcast signal towers.

The RC-N1 remote controller does not support QC protocol.
DJI RC Pro supports QC protocol.

a. It is recommended to fly in an open environment with less wireless interference.
b. Close other running programs in the background of the mobile device.
c. Pay attention to the direction of the antenna. Please adjust the plane of the antenna facing the position of the aircraft.

DJI Mavic 3 supports USB PD fast charging protocol. PPS protocol can handle up to 88 W of input power, and PD protocol supports up to 65 W of input power.

New batteries are in hibernation mode and need to be charged to wake up hibernating batteries.
Perform the following to wake up hibernating batteries.
Method 1: Connect the charging cable of the charger to the Type-C port at the rear of the aircraft, and charge the battery until the battery level LEDs light up.
Method 2: Insert the batteries to the Battery Charging Hub, and charge the batteries until the battery level LEDs light up. Please note that the battery charging hub charges batteries in sequence. After a battery is fully charged, the battery charging hub will start charging the second battery to bring it out of hibernation.

DJI Mavic 3 Battery Charging Hub can be used to charge up to three batteries and supports USB PD fast charging protocol. But the Battery Charging Hub cannot be used for battery discharging.

Yes, make sure that the battery is turned off before charging. Please note that the battery cannot be charged when it is turned on.

Before storage, please make sure that the remaining battery level is at least 60%. It is recommended to charge and discharge the battery once every three months to improve battery performance.
If the battery level is below 60%, it is recommended to charge it until it is 60% before storage.
If the battery level is above 70%, the battery will discharge automatically on the 9th day to about 60%.

The Battery Charging Hub can charge up to three batteries in sequence according to their remaining power level, from high to low.

Yes.

It takes more than 10 hours to fully charge the battery when using a normal Type-C cable to connect the DJI Mavic 3 charger as fast charging is not available. It is recommended to use the fast charging cable to charge the battery first.

The battery’s firmware is updated when the aircraft’s firmware is updated via the app.
If the battery needs to be updated separately, a warning stating that the battery’s firmware needs to be updated will be shown in the app. Tap to update the battery. Or when DJI Assistant 2 is connected, an “Inconsistent Firmware Found” warning will be shown, then tap it to update the battery.

Press once: Check the current battery level.
Press once and then press and hold: Power on or off the battery.
Press and hold for more than four seconds: Link the aircraft with the remote controller.

The DJI 65W Portable Charger comes with a 65W USB-C cable to charge the Mavic 3 battery. With another USB-A port and a USB-C data cable included in the package, it can also charge the remote controller at the same time. It is recommended to use a standard USB-C cable to charge the Mavic 3 battery.

Approximately 96 minutes when using the DJI 65W Portable Charger.

Yes. However, to ensure charging efficiency, we still recommend using the DJI 65W Portable Charger. Other chargers at 60W or above supporting PPS/PD protocol are also recommended.

Yes.

SanDisk Extreme PRO 64GB V30 A2 microSDXC
SanDisk Extreme PRO 128GB V30 A2 microSDXC
SanDisk Extreme PRO 256GB V30 A2 microSDXC
SanDisk Extreme PRO 400GB V30 A2 microSDXC
SanDisk High Endurance 64GB V30 XC I microSDXC
SanDisk High Endurance 128GB V30 XC I microSDXC
SanDisk High Endurance 256GB V30 XC I microSDXC
Lexar 667x 64GB V30 A2 microSDXC
Lexar 667x 128GB V30 A2 microSDXC
Lexar 667x 256GB V30 A2 microSDXC
Lexar High-Endurance 64GB V30 XC I microSDXC
Lexar High-Endurance 128GB V30 XC I microSDXC

DJI Mavic 3 can be used with DJI RC Pro and DJI Smart Controller is not supported.

Yes.

There are A/B motors and A/B propellers:
“A” propellers with gray circle marks should be mounted onto “A” motor propeller mounts, which have a gray arc on the outer ring.
“B” propellers without gray circle marks should be mounted onto the “B” motor propeller mounts that don’t have gray arcs.
Insert the propeller into the propeller mount and press it down to the end, and rotate it in the locking direction until it bounces back and locks.

Please check whether propellers are broken, worn, misshapen, or corroded before each flight. If yes, replace them immediately.

DJI Mavic 3 series can be used with the DJI Fly app.
You can download the DJI Fly app from major application stores or from the Downloads page on the DJI official website . Please check the compatibility device list on the website.

Maximum flight altitude: 100 m (subject to local regulations, please check with your local dealer);
Longest control range: 2,000 m;
Maximum flight speed 10 m/s, maximum operating flight speed 10 m/s

Droplet size: 50-500 μm.
The droplet size can be customized or set to one of six droplet size levels: Very Coarse, Coarse, Medium, Fine, Very Fine, and Extremely Fine.

No.

No.

1. Multidirectional Obstacle Sensing on the horizontal plane as well as Obstacle Bypassing in the direction of the drone’s nose.
2. Steep-slope Terrain Follow.

1. These features can be used in AB flight routes and fully automatic operations, but not in manual routes.
2. The light intensity must be moderate, the scenarios must have rich texture features, and the Binocular Vision System must be free of stains or obstructions.
3. Active Obstacle Bypassing is supported at an altitude of 2.5-8 m. Terrain Follow is supported at an altitude of 1.5-30 m.
4. Obstacle Bypassing is not recommended around electric or guy wires.

It can survey slopes up to 20°.
*To ensure a high success rate of surveying and mapping, DJI AGRAS T50 will automatically adjust its flight speed based on the hill slope. The steeper the slope, the slower its speed.

Area Route surveying: Surveys and maps all areas and automatically detects field boundaries and obstacles.
Boundary Route surveying: Surveys and maps the 20 m wide area around the field boundary. This mode is capable of quickly surveying large areas and is suitable for areas without obstacles.

Orchard and field routes are compatible with T series AGRAS drones. Before a mission, check operating parameters such as the field margins, route spacing, and flight speed.

Yes.

Yes.

The charging cable is 1.5 m long. Between flights, help the battery cool down more quickly by keeping it away from the heat source of the generator.

When conducting fast charging by connecting a third-party generator, please select a generator with 220 V-240 V output and output power no lower than 12 kW. Connect the live wires (labelled with L), null lines (labelled with N) and earth wires (labelled with PE) of the two fast charging cables of the C10000 Smart Charger with the live wire, null line and earth wire of the generator, respectively.

The C10000 Intelligent Power Supply does not support three-phase input. However, it can achieve single-phase fast charging in an environment with three-phase five-wire industrial power that meets a power requirement of over 18 kW. Please follow the wiring instructions in the C10000 user manual. Additionally, since power grid configurations vary by country and region, it is recommended to contact your local distributor and power grid provider to confirm whether the charging environment is suitable before use.

The DJI AGRAS T50 Spreading System supports switching to a small hopper gate. Low flow rate spreading is more precise.

No.

1. Larger discharge hatch, flow increase, and a maximum 108 kg of granules can be spread per minute;
2. With the spiral channel spinning disk, spreading is more uniform;
3. Capacity has been increased to 75 L.

The DJI AGRAS T50 has DJI’s new O3 video transmission system equipped with four antennas. It can transmit smoother images when working with tall crops. The video transmission signal quality is greatly improved.

It’s an optional module.

AGRAS DJI AGRAS DJI AGRAS T50, AGRAS T25, AGRAS T40, and AGRAS T20P.

1. Connect the support rod via the adapter and secure the DJI Relay in an open and unobstructed area.
2. Make sure that the DJI Relay is installed at least 2 meters higher than obstacles to ensure smooth signal transmission.
3. Do not use the DJI Relay during thunderstorms.

No.

Phantom 4 RTK, Phantom 4 Multispectral, DJI Mavic 3 Multispectral and DJI Mavic 3 Enterprise are supported. Photos taken by non-DJI aircraft are not supported.

Field, orchard, and multispectral scenarios can be reconstructed.

DJI SmartFarm Web is at free trial currently. Follow up for updates.

Elevation Analysis: Monitor elevation data to analyze land level status and provide guidance on leveling operations to improve efficiency.
Crop growth monitoring: Observe crop growth through NDVI and other vegetation indices to identify seedling emergence, nutritional status, weed distribution, water stress, and other conditions, to improve field scouting efficiency.
Prescription Maps: Generate prescription maps for variable rate fertilization and crop protection based on crop growth monitoring results, ensuring even growth and reducing the application of chemicals.
Fruit tree counting: Automatically count fruit tree numbers.
Surveying and mapping of orchards and farmlands: Map operation areas and plan fully automatic routes for AGRAS drones.
Farmland surveying and mapping: Generate high-resolution maps where farmland boundaries are automatically extracted, allowing users to survey the cultivated area.

The upload limit for a single mission is 20,000 photos, including TIF format photos. We recommend that you upload no more than 10,000 photos per mission.

Maximum flight altitude: 100 m (subject to local regulations, please check with your local dealer);br> Longest control range: 2,000 m;
Maximum flight speed 10 m/s, maximum operating flight speed 10 m/s

Droplet size: 50-500 μm.
The droplet size can be customized or set to one of six droplet size levels: Very Coarse, Coarse, Medium, Fine, Very Fine, and Extremely Fine.

No.

1. Multidirectional Obstacle Sensing on the horizontal plane as well as Obstacle Bypassing in the direction of the drone’s nose.
2. Steep-slope Terrain Follow.

1. These features can be used in AB flight routes and fully automatic operations, but not in manual routes.
2. The light intensity must be moderate, the scenarios must have rich texture features, and the Binocular Vision System must be free of stains or obstructions.
3. Active Obstacle Bypassing is supported at an altitude of 2.5-8 m. Terrain Follow is supported at an altitude of 1.5-30 m.
4. Obstacle Bypassing is not recommended around electric or guy wires.

It can survey slopes up to 20°.
*To ensure a high success rate of surveying and mapping, T25 will automatically adjust its flight speed based on the hill slope. The steeper the slope, the slower its speed.

Area Route surveying: Surveys and maps all areas and automatically detects field boundaries and obstacles.
Boundary Route surveying: Surveys and maps the 20-m wide area around the field boundary. This mode is capable of quickly surveying large areas and is suitable for areas without obstacles.

Orchard and field routes are compatible with T series Agras drones. Before a mission, check operating parameters such as the field margins, route spacing, and flight speed.

Yes.

No. It is not included as standard.

Yes. The 1.5m-long charging cable of the D12000iEP can be purchased additionally, and used for D6000i.

When conducting fast charging by connecting a third-party generator, please select a generator with 220 V-240 V output and output power no lower than 6 kW. Connect the live wires (labelled with L), null lines (labelled with N) and earth wires (labelled with PE) of the two fast charging cables of the C8000 Intelligent Charger with the live wire, null line and earth wire of the generator, respectively.

The C10000 Intelligent Power Supply does not support three-phase input. However, it can achieve single-phase fast charging in an environment with three-phase five-wire industrial power that meets a power requirement of over 18 kW. Please follow the wiring instructions in the C10000 user manual. Additionally, since power grid configurations vary by country and region, it is recommended to contact your local distributor and power grid provider to confirm whether the charging environment is suitable before use.

The T25 Spreading System supports switching to smaller hopper gates. Low flow rate spreading is more precise.

No.

The DJI AGRAS T25 has DJI’s new O3 Transmission system equipped with four antennas. It can transmit smoother images when working with tall crops. The video transmission signal quality is greatly improved.

It’s an optional module.

Agras T50, DJI AGRAS T25, Agras T40, and Agras T20P.

No.

1. When using the Relay, make sure there is no obstruction between the remote control and the Relay, or between the Relay and the drone
2. Make sure that the Relay is installed at least 2 meters higher than obstacles to ensure smooth signal transmission.
3. Do not use the Relay during thunderstorms.

Phantom 4 RTK, Phantom 4 Multispectral, DJI Mavic 3 Multispectral and DJI Mavic 3 Enterprise are supported. Photos taken by non-DJI aircraft are not supported.

Field, orchard, and multispectral scenarios can be reconstructed.

The upload limit for a single mission is 20,000 photos, including TIF format photos. We recommend that you upload no more than 10,000 photos per mission.

Elevation Analysis: Monitor elevation data to analyze land level status and provide guidance on leveling operations to improve efficiency.
Crop growth monitoring: Observe crop growth through NDVI and other vegetation indices to identify seedling emergence, nutritional status, weed distribution, water stress, and other conditions, to improve field scouting efficiency.
Prescription Maps: Generate prescription maps for variable rate fertilization and crop protection based on crop growth monitoring results, ensuring even growth and reducing the application of chemicals.
Fruit tree counting: Automatically count fruit tree numbers.
Surveying and mapping of orchards and farmlands: Map operation areas and plan fully automatic routes for Agras drones.
Farmland surveying and mapping: Generate high-resolution maps where farmland boundaries are automatically extracted, allowing users to survey the cultivated area.

DJI SmartFarm Web is at free trial currently. Follow up for updates.